
| Is your Tormek grindstone going out of shape quickly? Then you must be a woodturner and you need a harder, tougher stone. | |
|
Our special Tormek grinding wheels deliver
|
Why is the Tormek stone so soft? The stone supplied with the Tormek is designed to be very soft so it
is perfect for sharpening plane irons, chisels and other wide blades
used by cabinet makers. Unfortunately, sharpening woodturning HSS gouges
will strip abrasive from the soft stone at a rapid rate. Deep grooves
in the surface soon appear and frequent dressing is needed - wasting
precious grit. |
|
| Microcrystalline grit Medium 250mm x 45mm 80 grit £82.50 Fine 200mm x 40mm 180 grit £59.80 |
Pink toughened grit Fine 250mm x 45mm 180 grit £62.75
|
|
Stones normally supplied with bushes for 12mm bore for the Tormek. Other bushes available - please specify. The actual hole size in the stones is 1,1/4" (31.75mm). Stones can be supplied for other machines such as Delta, Jet, and Axminster wet grinders similar to the one show at right. |
![]() |
A-Z all products - Main grinding page - Home page - Ordering info, postage etc