 |
The
Supernova MKII Scroll Chuck for Woodturners
A reliable, hardwearing, easy to operate self-centering four jaw chuck.
Compared to the MK1 the gears are now enclosed and the T bar is much
easier to insert.
Supplied with screwchuck insert for initial mounting of bowl blanks
etc.
Guaranteed for five years |
MkII
Supernova chuck £140 inc VAT and postage in UK
The ball nose T bar gives effortless tightening
and will tilt away from the chuck at an angle allowing the chuck to
be used inside a bowl. This feature is handy for rechucking bowls which
have been roughed out from green wood.
Free postage (worth up to £15 in UK) also applies to any other
products (not machinery) ordered at the same time.
|
Free
postage in UK |
|
|
- Powerful grip both ways
- Versatile, compact, light weight
- Easily changed threaded inserts for different lathe threads
- Geared scroll with one handed T bar tightening.
- Wide range of quality accessories
- Low overhang to reduce vibration and strain on lathe bearings
- No dismantling required. Jaws are easy to change with the
tool provided.
- The back of the chuck is enclosed with a plastic dust cover with
24 indexing holes moulded in
|
Features and Specification
- Supplied with "50mm" steel self centering jaws which grip
both internally (expand into 56mm recess) and externally (compress
onto 49mm "spigot").
- Machined steel body, diameter 100mm
- Jaw movement - 15mm change in diameter (limited by safety stop screw)
- Supplied with (see photo above) 50mm jaws, screwchuck insert, threaded
insert to fit your lathe, ball end T
bar, hex keys and manual in cardboard box.
See our Thread
list to see if the chuck can fit your lathe. Of course if you change
your lathe in the future you can change the insert to fit the new thread.
|
