Chucks for woodturners
 |
MasterChuck II £97.25
Much more info We have been designing and manufacturing chucks ever since 1972 when the original "coil chuck" was produced. The Masterchuck (shown left) was first made to our design by Henry Taylor Tools in 1986. It is now made for us in Sheffield. It has an extremely stong grip even in a shallow recess (2mm in this bowl). |
 |
Supernova (Mark 2) - four
jaw self centering geared scroll chuck with effortless T bar tightening
£140. Price includes insert to fit to your lathe thread with special spanner provided. You can easily change the insert to make the chuck fit another lathe. Much more info |
 |
Patriot Very similar to the SuperNova but made in Sheffield England. Four jaw self centering geared scroll chuck 15% lighter in weight than the Supernova but with greater jaw movement and slightly superior grip. Takes Nova jaw sets and threaded inserts
. Available in all common thread sizes. 1,1/2" threads and 33mm thread sizes have to be dedicated machined in threads. Smaller threads use interchangeable inserts (spanner provided so if you have two lathes you can quickly move the chuck from one lathe to another. |
 |
Record 4000 Four jaw
self centering geared scroll chuck with effortless T bar tightening
£149. Currently available only in 1" x 8 t.p.i. |
Which chuck to buy? About chucks comparison of Masterchuck and other scroll chucks
Coil chuck - novel chuck with excellent grip for large hollowing projects - only £79 More info on coil chuck
Axminster chucks and accessories all available but not always in stock
Drill chucks - 1/2" £20.70 specify 1 or 2 morse taper. Ours are the only ones which can be retained in the taper with a drawbar for used to grip miniature wooden pieces. more info
Carriage is extra. VAT (sales tax) is included
This page updated Feb 2006 - contact us for latest prices and offers Back to home page